FSA's Afterburner is a tough, lightweight seatpost that works great on road and mountain bikes. Its 1-piece 3D-forged aluminum construction makes it strong and stable while remaining light. And, it's super easy to adjust thanks to the convenient 2-bolt clamp.
On leg-burning climbs, crazy fast descents and rolling technical terrain, RockShox's Reverb Stealth dropper post enables you to attack the trails like never before. Just hit the hydraulic remote lever and drop your saddle 100mm to 150mm of infinitely adjustable travel without ever slowing down! The return speed is easily adjustable by turning a dial on the remote while the triple-lipped sealing system and sealed hydraulic hose keep dirt out for clean, consistent operation. There's also an included collar that limits travel to a preferred height setting. This Reverb Stealth w/Connectamajig makes installing and removing the post easier and quicker.
$19.98 - $19.99
• Forged aluminum • 7/8-inch seat-clamp diameter • 165 grams
• Aluminum • Coil spring provides plush suspension • Adjustable pre-load design • Micro-adjust seat clamp • 450 grams
$7.96 - $7.99
• Shim available in various sizes • For use with 25.4mm or 27.2mm seatposts
$12.99 - $19.98
• Unicycle-specific seatpost
Giant's Vector Seatpost offers superb aerodynamics, low weight, and the vibration damping high-end carbon is known for. The adjustable clamp head can be set up to provide either -5 or 25mm offset without any additional parts or tools.
Bontrager's SSR seatpost is built to last thanks to its rugged straight-gauge 6061 aluminum. And, it boasts an infinitely adjustable, forged, single-bolt clamp.
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
- 3D forged from 2014 heat-treated aluminum for optimal strength to weight ratio - Race Face's triple butting design maintains strength in critical areas while reducing overall weight - The tube is anodized & shot peened for increased fatigue life - Updated Hunter head design for easy saddle installation and full adjustability - 3D forged from 2014 heat treated aluminum with triple butted mast - Thumbscrew tightening system allows quick dial-in of the saddle angle by hand - Angled clamp bolts allow easy tool access for hassle free adjustment - Rubber grommet seals the post to prevent water from entering seat tube - Accepts 7/8mm CrMo/alloy and 7/9mm carbon rails. 260g (30.9mm)
• Steel • Polished-chrome finish • 7/8-inch seat-clamp diameter
Let Giant's Comfort Suspension Seatpost take the sting out of cycling. This plush shock-absorbing post mutes road vibration and ensures rider comfort.
Crafted from 2014 aluminum, Specialized's Pro 2 Alloy MTB Seatpost is tough and light. The laid-back, single-bolt adjusting clamp holds fast and makes attaching and positioning the seat a cinch. And, the anodized finish looks great, too.
On leg-burning climbs, crazy fast descents and rolling technical terrain, RockShox's Reverb dropper post enables you to attack the trails like never before. Just hit the hydraulic remote lever for 100–125mm of infinitely adjustable up-and-down saddle movement without ever slowing down! The return speed is easily adjustable by turning a dial on the remote while the triple-lipped sealing system and sealed hydraulic hose keep dirt out for clean, consistent operation. There's also an included collar that limits travel to a preferred height setting. So go ahead and drop your seat a couple of inches for that 30-foot technical section, raise it for that long climb then lower it all the way and get back for that steep descent, without losing your flow.
$26.99 - $33.70
Origin-8's Pro Fit Alloy Seat Post is made of light and durable forged aluminum that's been anodized and laser etched for a custom look. It also features an adjustable 2-bolt clamp that holds fast and lets you easily dial in your seat position. And, this fine post comes in a variety of diameters to fit almost any bike.
$15.00 - $21.99
Giant's Alloy Seatpost is dependable and respectably light at a great price. It boasts a single bolt micro-adjust clamp so you can dial in a great saddle position.
- Giant Variant carbon seatpost - Fits 2016+ TCR Advanced models (non-ISP)
$18.99 - $21.99
• Forged aluminum • Integrated micro-adjust seat clamp
- Straight-gauge 6061-T6 alloy shaft construction - 2-bolt rocker-head with micro-adjustment - Suitable for road or mountain use
Bontrager's Speed Concept Seatpost lets you get your fit dialed before your next triathlon or time trial. It's crafted from OCLV carbon and the one-bolt head provides simple adjustments. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics.
Custom-drawn aluminum construction, a two-bolt rocker head, and longer saddle rail clamps make Bontrager's Rhythm Pro Seatpost a great choice for riders who need a no-nonsense, tough-as-nails seatpost for the mountain bike. It's available in two different diameters to suit your frame.
Bontrager's Speed Concept Seatpost lets you get your aero fit dialed. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics, and the clamp is compatible with both standard and oversize saddle rails. This seatpost is compatible with 2014 Trek Speed Concept 9 Series bikes.
A seatpost should do one thing well: hold your seat. Bontrager's new carbon fiber Pro seatpost does that and more with a reliable 2-bolt design that lets you swap saddles with ease. - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - OCLV carbon fiber shaft - Forged 6061-T6 alloy head with OCLV carbon fiber top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use
The all-new XXX Seatpost is still Bontrager's lightest carbon post, but it's been redesigned with the new CnD shape profile for a more controlled and forgiving ride experience. - CnD shape profile increases torsional stiffness and vertical compliance - Designed to offer increased compliance at maximum and minimum insertion points - 2-bolt design offers independent setback and tilt adjustments (+/- 12 degrees) - 100% OCLV Carbon fiber shaft and head - Includes 7x7mm round rail clamp compatibility - Carbon 7x10mm saddle ears sold separately
Dropper posts are awesome until they're not. That's why Bontrager created the Drop Line to be the one you can rely on. From installation to activation, no other dropper post can withstand the rigors of real-world riding and just keep functioning. And since cable installation is so easy, swapping from bike-to-bike is as easy as with a non-dropper seatpost. The Drop Line dropper seatpost comes in 100mm, 125mm, and 150mm lengths. - Remote cable actuation with ergonomically designed under-bar lever - Air-sprung hydraulic locking cartridge offers infinite adjustability within dropping range - Keyed chassis prevents rotation for a stable ride - 2-bolt rocker head with micro adjustment allows for easy saddle tilt adjustment - Internal cable routing keeps housing tucked away and free from moving wheel - Includes cable, housing, and 1x under-bar remote lever - On-Bar Drop Line Universal Lever sold separately - Frame must be compatible with internally routed seatpost routing
The Elite seatpost is a distilled design guaranteed to deliver reliable everyday performance for years to come. Perfect as a replacement or your next upgrade. With an alloy body and a 2-bolt micro adjust head, this seatpost is available in a slew of diameters, lengths, and offsets to get you the right position. Key features: - 2-bolt micro-adjust head mechanism offers 15 degrees of adjustment - Constructed of 2014 alloy - Forged 6061-T6 alloy head, top and bottom clamps - Unique clamp shape allows for easy saddle changes - Compatible with standard and oversize carbon saddle rails - Suitable for road or mountain use
Keep the bumps at bay with the Pavement Suspension Seatpost. It tames rough roads to keep you comfortable all day long.
Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
Crank Brothers calls their Highline dropper post the best in the world, and once you've ridden it, you'll know why. Years of research, development, and rigorous testing have yielded a dropper post with premium sealing, exclusive igus bearing and keys, Jagwire cable, and a self-contained hydraulic cartridge—all resulting in industry-leading quality and reliability. The title "world's most ergonomic remote" is deserved as well, as this innovative remote sports unique spherical adjustment, with near-infinite rotation and tilt customization options, for perfect cockpit ergonomics. Specifications: - length: 400mm - material - post: 7075-T6 aluminum - material - clamp: 7075-T6 aluminum - travel adjustment: 5" / 125mm - minimum stack height: 50mm - material - quill: 7075-T6 aluminum - weight: 580g (30.9mm)
The Turbine Dropper post from RaceFace is a hybrid design that couples mechanical and hydraulic locking technologies. The rider's weight is supported with a mechanical lock meaning a solid connection and less potential for failure over time. The actuation mechanism offers unrivaled performance, control and reliability with low air pressures and static seals. Turbine also operates in below-freezing temperatures, making it a good choice for fat bikes and cold weather riding. - Actuation cable easily (and tool-free) disconnected with Quick Connector for easy post removal. Uses standard shifter cable and housing - Internal cable routing - Infinitely adjustable - Left- or right-mount universal thumb lever remote - Race Face Hunter Head two-bolt design - Remote Position: Left or Right - Cable Routing: Internal - Weight: 495g
Page 1 of 2 Next page