Accessories

• Mounts inside handlebar grips • Optional hand-held use

- 120db electronic rechargeable bicycle horn with remote - USB 280mAh rechargeable battery charges in 1.2 hours and lasts approximately 30 days or 2500 uses - Charging indicator light shows red when charging, and green when fully charged - IP65 water and dust proof - Compatible with 22.2 - 31.8mm handlebars - Whistle, horn, and alarm sounds

• Pencil type w/clip

• High gloss formula provides the ultimate shine on all surfaces: metal, carbon fiber, plastic, rubber and vinyl. • Polishes and protects in one easy step • Use on bicycles, fitness equipment, motorcycles, watercraft, ATVs and more. • Slick film helps prevent dirt build-up on frame and parts.

- Direct-mount adjustable kickstand - Direct mount attaches to the chainstay dropout - Adjusts to fit bikes from 24" to 29" - Large foot profile for increased stability

• For use in basement and garage • Saves space and protects tires • Fast and easy ceiling mounting • For ceiling heights up to 13` (4m) • Lifts weights up to 45lbs (20kg) • Clamp included

Help your young ones learn to ride safely by installing Sunlite Training Wheels on their two-wheelers. These wheels roll smoothly thanks to their steel construction with hard rubber tires.

• Fits most adult bikes • Durable plastic • Water resistant

Rugged, spacious, and water resistant, Sunlite's Utili-T Panniers are ideal for your ride to work or your journey cross country. They easily mount to your rear rack (sold separately), and four zippered compartments offer plenty of storage for clothes, food, and anything else you can imagine. A carrying handle makes these bags functional off the bike, too. Reflective trim keeps you visible on the roads, and compression straps keep everything in place.

Coming up with ways to make you safer on the road, when using Serfas lights, is a top priority. The "BLAST" Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10-minute runtime in that specific mode. How It Works: - When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute. - When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times. - Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached. - While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete. - Light emits a beep when power button is pushed & light goes from mode to mode. Features: - "Blast" Audible Warning System Alerts Rider Of Low Battery - Lasts Up To 28 hrs on 60 Lumen Flash - Aero-Bracket Fits Almost Any Post Or Application On A Bike - 42 Micro LEDs Specs: - Solids Modes: High (200 Lumens): 1 hr, Medium (100 Lumens): 2.25 hrs & Low (60 Lumens): 3.5 hrs - Flash Modes: High Rapid (300 Lumens): 6.25 hrs, High Slow (300 Lumens): 12 hrs & Low (60 Lumens): 28.5 hrs - Weight: 55 Grams Without Bracket - Battery: USB Rechargeable Li-Polymer

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps

The Saris Mighty Mite is a lightweight, solid bike-parking rack for indoor, outdoor, and residential use. Built with a rugged, weatherproof steel frame, the Mighty Mite holds up to six bikes within its compact footprint.

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

- Makes braking and shifting super smooth by reducing the drag in cable housings - Law prohibits ORM-D materials from shipping by air

With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).

The Universal Aerodrink Bracket fastens quickly and easily to your aerobar extensions using secure Velcro straps. It's compatible with Profile Design's Aerodrink, Insulated Aerodrink, and Aquacell systems (all sold separately).

Discover freedom with Cenote – the first disposable hydration system with recyclable reservoirs. Durable, but priced for a single use, Cenote makes cleaning optional. So, go ahead use your system however you want, for as long as you want. And when you’re ready, just replace with a fresh Cenote reservoir. - Disposable/ fully recyclable - Fits most backpacks - Premium, high flow 360-degree locking bite valve - Removable cap gasket for easy cleaning - Lightweight and easy to fill - BPA free, and no chemical coatings - Replacement components sold separately - Wide mouth opening is easy to fill, and fits hand-held filtration systems and Polar Bottle caps

Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders! Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus, the hardware is pre-installed for hassle-free mounting.

Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped. - Ultimate protection and durability for metal-metal contact - Base oil with rust inhibitors and anti-wear additives

Having trouble getting at internal nipples? Park's 3-Way Internal Nipple Wrench comes to your rescue. It features a 3.2mm square drive, as well as 5 and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. It also utilizes Park's innovative Y-shape design that provides heaps of leverage and comfort.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 52-54 mm and a minor diameter of 48.8 mm, including: - CeramicSpeed T47/86 - Enduro T47 (30mm and DUB spindles) - Enduro BB30/30a TorqTite (30mm and DUB spindles) - Kogel T47 - SRAM T47 DUB - White Industries T47 - White Industries PF30 Thread-Together

Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more

Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.

Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup. The handle of the BBT-4 is vinyl coated for comfort. The major diameter of the tool is nominally 44mm, and the minor diameter 38mm. The BBT-4 is compatible with the following sealed cartridge bottom brackets: • Campagnolo Veloce • Xenon • Mirage • Daytona • Avanti

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.