Accessories

Clean Ride is White Lightning's legendary self-cleaning lube. By creating a dry, waxy film on your chain this lube doesn't attract dirt and grime like traditional oil based lubricants. Should dirt work its way onto your chain or gears Clean Ride's self-cleaning action is activated causing small particles of wax to break free, taking the riff-raff with it. Not only will you spend less time cleaning your chain, you'll enhance the lifespan of your drivetrain, too!

The Giant Delivery basket is one of the most enduring and iconic products in Wald's catalog. Popular among messengers and paperboys (feel free to ask your father or grandfather about this noble profession), this basket is designed to carry large loads thanks to its stout legs, cargo bands, and heavy-duty handlebar clamps. - Made in U.S.A. (Maysville, KY) - Great for delivery, industrial bikes and hauling large loads - Reinforcement bands add extra strength - this basket is built for rugged use - Dimensions: 21 x 15 x 9 inches; the basket tapers to 18.25 x 12.25 at the bottom - Extended handlebar clamps allow greater clearance for shift and brake cables. They are 3 5/8" apart and fit 7/8", 1" and 31.8mm diameter handlebars - Legs extend from approx. 14 1/2 inches to 23 inches and have two mounting holes for mounting to either the axle or fork eyelets for bikes with quick release front hubs - 157B has a Zinc plated finish and 157GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.8 lbs.

The Wald 585 rear basket sits atop your bicycle's rear rack. Perfect for hauling full-sized grocery bags, small laptop bags, spare clothes, or maybe even storing your helmet while parked. - 14 x 9 x 9 inches - Fits on rear rack of bicycles - Sturdy steel construction - Made in the USA

- Steel wheels - For riders up to 100lbs - Fits 12" - 20" wheel bikes

Wald's 10252 training wheels are designed to mount on most single speed bicycles with 16- to 20-inch wheels and are intended for use by riders weighing up to 100 pounds. These training wheels feature new frame adapters that improve installation. The new frame adapters enable this wheel set to be mounted on bicycles with .75 and 1.00-inch rear frame tubes. The training wheels can also be mounted onto bicycles with 1.25-inch rear frame tubes when the frame adapters are not used.

Wald's 1216 training wheels are designed to mount on most single speed bicycles with 12- to 16-inch wheels. This model is intended for use by riders weighing up to 75 pounds.

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

A secure, direct-mounted saddle bag with quick connections for the Blendr Fendr and rear lights - Quickly connect Blendr Fendr and rear lights with purposeful mounts in seconds - Two internal pockets reduce rattling and hi-vis material makes it easy to find what you need - Made with durable, soft, and water-resistant nylon with an easy-to-use zipper - Integrated design that mounts directly to compatible saddles with 2 m5 hex bolts - Compatible with Aeolus, Verse, Boulevard, and Commuter saddles. Not compatible with RSL-level saddles - Included: bag, mount, spacer, one pair of short bolts, and one pair of longer bolts

Know what's coming. Ride with extra confidence with Trek CarBack Radar Rear Light. CarBack's radar helps detect rear-approaching vehicles from up to 240m and provides audio and visual alerts through paired GPS head units for increased on-bike awareness. Built with integrated best-in-class Daytime Running Lights that are visible from up to 2km away, CarBack is a must-have for every cyclist riding on shared roads. - CarBack can detect and alert riders of rear-approaching vehicles from up to 240m away - Compatible with most cycling GPS computers - Pair CarBack with the Trek Accessory app to see a vehicle's rear-approaching and passing distance on your smartphone - Designed with focus, flash, and range to be Daytime-visible from up to 2km away - Four light flash modes: Day Flash 90LM, Day Steady 25LM, Night Steady 5LM, and Night Flash 5 LM - Visible fuel gauge LEDs make it easy to see CarBack's 7+ hour battery status - IPX7 waterproof rating to confidently ride through wet conditions - Includes Quick Connect Plus rear mount and USB-C charging cable

Hydration isn't a crime. Add a third water bottle to you bike! PRODUCT DETAILS - Includes hardware - Cage and bottle not included

A simple rear bike light for after dark. The Flare R Metro is a simple USB rechargeable rear bike light that can help cyclists be seen after dark. The versatile design and included bike mount make for easy, tool-free attachment to any bicycle. Remove the included mount to reveal a built-in clip that securely attaches to a rider's belt clip, pocket, or bag. Details: - A versatile USB rechargeable rear bike light designed to help riders stand out after dark. - 20 Lumens help make riders more visible after dark - Triple LED design can be seen from a wide visibility angle - Versatile design can be mounted on a bike, belt, or bag - Two steady modes and one flash mode - Low steady 8L-3 hrs, high steady 20L-1.5hrs, Flash 20L-6 hrs - Includes Flare R Metro, Clip Connect Mount, and Micro USB charging cable - Integrated clip for secure installation on belt or bag, simply remove the mount to access - Clip connect mount with 16-degree offset compensates for seatpost angle

Made with recycled materials, this side-entry bottle cage offers easy bottle access on small frames and in tight spaces. SIDE LOADING FOR TIGHT SPACES The Side Load Recycled Water Bottle Cage lets you easily access bottles while you ride. It's built from recycled materials and fits neatly in small spaces, making it the ideal choice for smaller frames, full suspension bikes, and when using a frame bag. Great for mountain and road riding alike. Using recycled materials in this product helps provide second life to unwanted end of life plastics. PRODUCT DETAILS - Made using recycled plastic - Lightweight and durable composite construction - Side-loading design allows for easy bottle access on compact frames - Mount it on the down tube for left-side water bottle access - Mount it on the seat tube for right-side water bottle access - Suitable for road and mountain use

A bright front light with Kindbeam, designed to keep light on the path ahead and out of oncoming riders' eyes. - Commuter Kindbeam keeps light on the ground ahead of you and out of oncoming riders' eyes - Color-temperature balanced beam with a clean cutoff pattern for confident night riding - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Long-lasting brightness exceeds FL1 industry standards and outlasts the competition - Runtimes: high 450LM — 1.5hrs, low 200LM — 6hrs, day flash 300 LM — 12hrs - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - Quick Connect+ offers secure installation with a flexible mount that's compatible with all bars 22.2 to 35mm - Includes Ion Comp R light, Adjustable Quick Connect+ Mount, and micro USB charging cable

The Voda Water Bottle gives you clean, consistent, at-the-ready hydration on any ride. It's made from recyclable, FDA-approved materials free from BPAs and Phthalates. Plus, it has a Pop Top cap that's easy to open and secure when closed for consistently leak-free transport. - Redesigned bottle and cap feature all-new materials for great feel and consistent closure - Pop Top's soft thermoplastic poppet is easy to open and close - Designed for easy entry/removal and secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates - Long-lasting graphics resist scratching for a look that lasts - Manufactured in the USA

The only thing better than fresh water on a long, hot ride is cold fresh water-that stays cold. Voda Ice is an insulated water bottle that keeps your water cold for longer and comes in a game-changing 28-ounce size that lets you carry more of it. The premium Flow Top cap and No-Drop Grip Ring give this bottle a great in-hand feel with easy-squeeze hydration. - A premium insulated bottle that keeps water cold, feels great in-hand, and provides leak-free closure - Form fit insulation layer keeps water cold twice as long as traditional bottle - Flow Top cap's heart valve and soft-touch poppet offers easy-squeeze hydration - Secure threaded cap with easy open-and-close poppet locks down leaks - No-Drop Grip Ring provides a grippy texture for confident grasp even when wet - Designed for easy cage entry and removal with secure retention - Bottle and cap are dishwasher safe and recyclable - USDA approved and free of BPAs and phthalates

When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool; 14- and 15-gauge spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.

Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.

• Water resistant • Durable plastic • Fits most bikes

Sunlite's Classic Flower Basket is just like the ones you remember as a kid. Made from weather-resistant plastic, it's tough, light and durable. It fits most handlebars and the flowers are removable. Carry your stuff in style.

- Bike rack RR 290 mm strut kit with hardware - Great for smaller frames - 4 bolts & nuts - 1 set/bag

Turn your bike into an errand-running, cargo-hauling machine with Sunlite's Folding Basket. This sturdy basket attaches to your rear rack in a snap and folds out of the way when not in use.

• Vinyl coated hooks • 9 mm diameter • Black

Sunlite's Handlebar Mount Bottle Cage lets you attach a water bottle to your handlebars for easy access. Its lightweight design is good for road and mountain use.

Learning to ride safely is easy with Sunlite's Training Wheels. These wheels roll smoothly thanks to their heavy-duty steel construction with hard rubber tires. They fit bicycles with wheel sizes of 20 to 26 inches, and the height adjusts as the rider learns balance.

Protect your two-wheeled friend from the elements with Sunlite's Heavy Duty Bicycle Cover. It's made from tough water-resistant vinyl and features a drawstring to keep the cover taut around your rig. It fits most sizes of bikes, too, so even tall riders can take advantage!

Protect your three-wheeled friend from the elements with Sunlite's Heavy Duty Trike Cover. It's made from tough water-resistant vinyl and features a drawstring to keep the cover taut around your rig. It fits most sizes of trikes, too, so even recumbent riders can take advantage!

• Mounts inside handlebar grips • Optional hand-held use

- 120db electronic rechargeable bicycle horn with remote - USB 280mAh rechargeable battery charges in 1.2 hours and lasts approximately 30 days or 2500 uses - Charging indicator light shows red when charging, and green when fully charged - IP65 water and dust proof - Compatible with 22.2 - 31.8mm handlebars - Whistle, horn, and alarm sounds

• Pencil type w/clip

• High gloss formula provides the ultimate shine on all surfaces: metal, carbon fiber, plastic, rubber and vinyl. • Polishes and protects in one easy step • Use on bicycles, fitness equipment, motorcycles, watercraft, ATVs and more. • Slick film helps prevent dirt build-up on frame and parts.

- Direct-mount adjustable kickstand - Direct mount attaches to the chainstay dropout - Adjusts to fit bikes from 24" to 29" - Large foot profile for increased stability

• For use in basement and garage • Saves space and protects tires • Fast and easy ceiling mounting • For ceiling heights up to 13` (4m) • Lifts weights up to 45lbs (20kg) • Clamp included

Help your young ones learn to ride safely by installing Sunlite Training Wheels on their two-wheelers. These wheels roll smoothly thanks to their steel construction with hard rubber tires.

• Fits most adult bikes • Durable plastic • Water resistant

Rugged, spacious, and water resistant, Sunlite's Utili-T Panniers are ideal for your ride to work or your journey cross country. They easily mount to your rear rack (sold separately), and four zippered compartments offer plenty of storage for clothes, food, and anything else you can imagine. A carrying handle makes these bags functional off the bike, too. Reflective trim keeps you visible on the roads, and compression straps keep everything in place.

Coming up with ways to make you safer on the road, when using Serfas lights, is a top priority. The "BLAST" Audible Warning System emits a loud 85 Decibel signal when your light battery gets under 10-minute runtime in that specific mode. How It Works: - When the battery reaches 10 minutes of runtime, in its current mode, the light will emit a long beep followed immediately by a short beep. Sound will continue every minute. - When the power button is pressed it will put the light in the next longest running mode & it will restart the battery low alert until 10 minutes of runtime in the mode is reached. Repeat as necessary. Example: Going from highest mode to lowest mode at first beep could extend runtime up to 5 times. - Light will emit beep sound repeatedly when last minute of runtime in the current mode is reached. - While charging the light the power button will blink blue. When full charge is achieved light will beep to notify charging cycle is complete. - Light emits a beep when power button is pushed & light goes from mode to mode. Features: - "Blast" Audible Warning System Alerts Rider Of Low Battery - Lasts Up To 28 hrs on 60 Lumen Flash - Aero-Bracket Fits Almost Any Post Or Application On A Bike - 42 Micro LEDs Specs: - Solids Modes: High (200 Lumens): 1 hr, Medium (100 Lumens): 2.25 hrs & Low (60 Lumens): 3.5 hrs - Flash Modes: High Rapid (300 Lumens): 6.25 hrs, High Slow (300 Lumens): 12 hrs & Low (60 Lumens): 28.5 hrs - Weight: 55 Grams Without Bracket - Battery: USB Rechargeable Li-Polymer

For a stable, worry-free ride with any rear wheel-mounted trainer. Product Features - For a stable, worry-free ride with any rear wheel-mounted trainer. - Unique 3-level design lets you select the level of difficulty. - Stack two blocks to simulate climbing workouts. Three different positions to raise your front wheel and simulate hill climbs - 2.1 inches (5.3 cm) - 2.7 inches (6.8 cm) - 3.1 inches (7.9 cm)

Stick to your fitness plan year round with the help of the Saris Mag+ trainer. It is the perfect way to keep your legs warm when it's cold, dry when it's wet, and safe when it's too dark to ride outside. With this turbo trainer, it's easy to turn your bike into your go-to calorie burner — no matter the season. Simply attach the handlebar-mounted shifter to change resistance during your workout without having to leave your bike. Want to train with Zwift or Rouvy? All you need is a speed sensor. Visit our setup guide to learn how to get started. - Magnetic resistance unit provides a quiet and frictionless ride. - Linear resistance boosts workout intensity to match each pedal stroke and gear click. - Mag+ comes with convenient, adjustable handlebar-mounted shifter. - Compatible with Zwift and other indoor cycling apps

The Saris Mighty Mite is a lightweight, solid bike-parking rack for indoor, outdoor, and residential use. Built with a rugged, weatherproof steel frame, the Mighty Mite holds up to six bikes within its compact footprint.

The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.

- Makes braking and shifting super smooth by reducing the drag in cable housings - Law prohibits ORM-D materials from shipping by air

With Profile's Aerodrink System you can stay in your aero position and stay hydrated. This durable, injection-molded 32-ounce bottle includes an extended straw for easy access, and its mesh plug is great for on-the-go refills. The Aerodrink also slips easily into Profile's Airstryke and Century aero bars (sold separately).

The Universal Aerodrink Bracket fastens quickly and easily to your aerobar extensions using secure Velcro straps. It's compatible with Profile Design's Aerodrink, Insulated Aerodrink, and Aquacell systems (all sold separately).

Discover freedom with Cenote – the first disposable hydration system with recyclable reservoirs. Durable, but priced for a single use, Cenote makes cleaning optional. So, go ahead use your system however you want, for as long as you want. And when you’re ready, just replace with a fresh Cenote reservoir. - Disposable/ fully recyclable - Fits most backpacks - Premium, high flow 360-degree locking bite valve - Removable cap gasket for easy cleaning - Lightweight and easy to fill - BPA free, and no chemical coatings - Replacement components sold separately - Wide mouth opening is easy to fill, and fits hand-held filtration systems and Polar Bottle caps

Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders! Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus, the hardware is pre-installed for hassle-free mounting.

Our Tenacious Oil is used for ultimate protection and durability for components that have movement with metal-to-metal contact. Our base oil has been produced for us by the same independent California refinery since 1971. The final blending of rust inhibitors and extreme wear additives happens at our facility before the product is bottled and shipped. - Ultimate protection and durability for metal-metal contact - Base oil with rust inhibitors and anti-wear additives

Having trouble getting at internal nipples? Park's 3-Way Internal Nipple Wrench comes to your rescue. It features a 3.2mm square drive, as well as 5 and 5.5mm hex sockets that slip perfectly into the tight surroundings of most rims. It also utilizes Park's innovative Y-shape design that provides heaps of leverage and comfort.

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Enduro T47 & PF30 bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. Fits 16-notch bottom bracket tool fittings with a major diameter of 52-54 mm and a minor diameter of 48.8 mm, including: - CeramicSpeed T47/86 - Enduro T47 (30mm and DUB spindles) - Enduro BB30/30a TorqTite (30mm and DUB spindles) - Kogel T47 - SRAM T47 DUB - White Industries T47 - White Industries PF30 Thread-Together

Precision CNC machined aluminum tool for the installation and removal of 12-notch external bearing bottom brackets. Anodized for easy identification and featuring a ratchet/torque wrench compatible 3/8" drive. - 46mm 12-notch OD cup - Race Face® Cinch™, Rotor® BSA30, Zipp® Vuma™, Hawk Racing™ BB3086™, and more

Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.

Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).

Park's BBT-18 is a heavy duty, investment cast tool for installing and removing all Shimano, ISIS Drive, and ISIS Overdrive 8-notch bottom bracket cups.

The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup. The handle of the BBT-4 is vinyl coated for comfort. The major diameter of the tool is nominally 44mm, and the minor diameter 38mm. The BBT-4 is compatible with the following sealed cartridge bottom brackets: • Campagnolo Veloce • Xenon • Mirage • Daytona • Avanti

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.